To Home Page

CR-509 4xGbE Adapter with Switch Function

Corrida-509 foto


  • Form factor – PC card PCI-express
  • 4 SFP ports on the front and one system port GbE
  • 100base-FX and 1000base-X modes
  • Configuration by jumpers
  • Microsoft NDIS5 checksum offload (IP,TCP,UDP)
  • IEEE 802.1Q VLAN
  • Spanning Tree IEEE 802.1w, IEEE802.1s
  • Compatible with XP/Win7/Win8/Win10/Linux/FreeBSD/DOS




Adapter CR-509 designed as the combined device. Depending on configuration, it realizes one of three functions – multiport SFP GbE adapter, embedded switch in PC form factor or network tap.

Unmanaged switch mode

This mode uses the device as a 5-port switch embedded to PC. The fifth port of the switch is connected to the MAC controller and can be accesses via PCI-express bus.

unmanaged switch


Ethernet tap mode

In this mode the device still functions as a switch, but port 0 and port 4 (system) perform special functions. They can connect a peripheral device with traffic to analyze to port. Using ports 1-3 the device to be analyzed will carry out outward communication. But the packets sent or received via port 0 will be copied to port 4 and sent to the MAC controller. With the help of a network analyzer these packets can be recorded and analyzed.

Network tap

4-port MAC controller mode

This mode assigns an internal VLAN to each external port of the adapter. Thus, the switch isolates the traffic between ports. The traffic from every external port is closed to the MAC controller only.

4-port mac


Application examples

Network tap example



Multiport LAN adapter application

Поиск по сайту

  Russia, Novosibirsk

©2001-2023 Parabel inc.